Skip to content
Conveyor engineering, supply, installation and maintenance — Egypt and the Arab region +20 110 083 4634 entra@entra-eg.com

Projects

Case studies

ENTRA conveyor projects in food, personal-care and heavy-industry plants: what each client needed, what we built and the equipment used.

Case studies

Blue steel bulk belt conveyor gantry being lifted into place by crane at the Al Nasr Chemicals site
Al Nasr Chemicals01 / 06
CASE STUDY 01 · BULK MATERIAL HANDLING

Heavy-duty belt conveyor on an elevated steel structure

Client: Al Nasr Chemicals
Industry: Chemicals, energy & heavy industry

The challenge
A bulk-material route had to cross an active industrial construction site on an elevated line, with the conveyor and its supporting steel built in step with the surrounding plant.
The solution
A troughed belt conveyor carried on a painted steel gantry and support towers, with grated walkways and handrails for safe maintenance access, erected on site with mobile-crane lifts.
  • Troughed belt conveyor with idler stations
  • Painted steel gantry and support towers
  • Grated walkway with safety handrails
  • Crane-assisted installation on site
Stainless steel inclined conveyor with overhead transfer section in a P&G Egypt production hall
P&G Egypt01 / 04
CASE STUDY 02 · STAINLESS STEEL · CLEAN PRODUCTION

Stainless steel inclined conveyor for a clean production hall

Client: P&G Egypt
Industry: Home & personal care

The challenge
Lift and transfer product inside a clean, high-specification production hall, where hygiene, floor space and safe access around neighbouring equipment all matter.
The solution
A stainless steel inclined conveyor with an overhead transfer section and top-mounted drives, installed beside the packing equipment with its working zone marked on the floor.
  • Stainless steel frame, easy to clean
  • Inclined section with overhead transfer
  • Top-mounted drive units
Curved modular plastic-chain conveyor on aluminium supports with yellow guard rails at P&G Egypt
P&G Egypt01 / 03
CASE STUDY 03 · MODULAR CHAIN CONVEYORS · PACKING LINES

Flexible modular chain lines between production machines

Client: P&G Egypt
Industry: Home & personal care

The challenge
Connect packing machines on a busy factory floor with compact, curved conveyor routes that operators and technicians can still work around safely.
The solution
Modular plastic-chain conveyors on aluminium-profile supports, with curves and transfers between machines and yellow guard rails protecting both people and the line.
  • Modular plastic chain with curves
  • Aluminium-profile support frame
  • Guard rails and floor safety marking
Stainless steel inclined cleated-belt conveyor assembled in the ENTRA workshop for Unilever Egypt
Unilever Egypt01 / 06
CASE STUDY 04 · INCLINED BELT CONVEYORS · HOME CARE

Stainless steel inclined cleated-belt conveyors

Client: Unilever Egypt
Industry: Home & personal care

The challenge
Raise product to a higher level on a production floor with equipment that stays compact, hygienic and easy to clean.
The solution
Inclined conveyors with a cleated belt and side walls on a stainless steel frame with covers and guarded drives, assembled and checked in the ENTRA workshop before installation in the plant.
  • Stainless steel frame and covers
  • Cleated belt with side walls
  • Guarded drive units
  • Workshop-checked before installation
Stainless steel inclined belt conveyor beside a packing machine at Nestlé
Nestlé01 / 06
CASE STUDY 05 · BELT CONVEYORS · DRY-GOODS PACKING

Compact stainless belt conveyors on a packing line

Client: Nestlé
Industry: Food & beverage

The challenge
Move packed product between machines on a hygienic dry-goods packing line, where space beside each machine is tight.
The solution
Short stainless steel belt conveyors, including inclined sections, driven by geared motors and set on adjustable feet so each one lines up with its packing machine.
  • Stainless steel frame on adjustable feet
  • Geared motor drives
  • Short inclined belt sections
Long belt conveyor carrying Lipton cartons along the packet-tea line
Lipton Egypt01 / 02
CASE STUDY 06 · BELT CONVEYORS · PACKING HALL

A carton conveying "highway" for a packet-tea line

Client: Lipton Egypt
Industry: Food & beverage

The challenge
Keep finished cartons moving along the length of a packet-tea packing hall while operators work at the packing stations beside the line.
The solution
A long, straight belt conveyor on painted steel legs forms a carton "highway" past the packing stations, linking the packet-tea line along the hall.
  • Long straight belt conveyor
  • Painted steel support legs
Shell drum-handling machine gripping yellow drums on a stacking frame
Shell01 / 05
CASE STUDY 07 · DRUM HANDLING · SITE STEEL

A drum-handling machine and access platforms for a lubricants site

Client: Shell
Industry: Chemicals, energy & heavy industry

The challenge
Move and stack filled drums safely, and give operators proper access to tanks and elevated equipment around the plant.
The solution
A gripper-type drum handling machine on a painted steel frame, working with roller conveyors, together with galvanised platforms, stairs and guard rails that were lifted into place on site.
  • Gripper arms for drum handling
  • Roller conveyor infeed
  • Galvanised platforms, stairs and guard rails
Yellow ENTRA pallet inverter with guarded walkway in a production hall
ENTRA engineered equipment01 / 05
CASE STUDY 08 · PALLET INVERTER

A pallet inverter built and installed with its safety guarding

Client: ENTRA engineered equipment
Industry: Manufacturing & packaging

The challenge
Transfer loads between pallets without manual handling, inside a working plant where operators must be kept clear of the moving frame.
The solution
An ENTRA pallet inverter with a rotating clamp frame, fenced walkway guarding and a local control panel, finished in high-visibility yellow and commissioned in the production hall.
  • Rotating clamp frame
  • Fenced walkway and safety guarding
  • Local control panel
Perforated stainless steel mobile bin on castors in a Mondelēz plant
Mondelēz (Kraft Foods)01 / 04
CASE STUDY 09 · STAINLESS STEEL · FOOD HANDLING

Mobile stainless steel bins for confectionery production

Client: Mondelēz (Kraft Foods)
Industry: Food & beverage

The challenge
Collect and move product and trim between processing stations in a food plant, with surfaces that are easy to clean and containers that roll to where they are needed.
The solution
Fabricated stainless steel mobile containers on heavy-duty castors, in solid and perforated versions with smooth sloped interiors, hand rails and foot-operated discharge doors, built to suit the line.
  • Stainless steel fabricated bins
  • Perforated and solid panels
  • Castors and foot-operated discharge door
Stainless steel conveyor lines running through a Juhayna packing hall
Juhayna01 / 05
CASE STUDY 10 · CONVEYOR LINES · PACKING HALL

Stainless steel carton conveying between filling and packing machines

Client: Juhayna
Industry: Food & beverage

The challenge
Connect filling machines to case packing across a large dairy hall, keeping cartons flowing overhead and at floor level while leaving space for people and trucks.
The solution
A network of stainless steel conveyors on a steel support structure, with elevated runs, floor-level transfers and access stairs, installed around the existing filling and packing equipment.
  • Stainless steel conveyor runs
  • Elevated support structure
  • Access stairs and walkways
Long modular chain conveyor line running through a Danone hall
Danone01 / 06
CASE STUDY 11 · MODULAR CHAIN CONVEYORS

Long modular chain conveyor lines with adjustable side guides

Client: Danone
Industry: Food & beverage

The challenge
Carry packed products over long distances through a dairy plant, with guides that can be set to different product sizes and a belt surface that is easy to wash.
The solution
Stainless steel framed modular plastic chain conveyors with long straight runs, hand-wheel adjustable side guide units and a compact gear-motor drive, assembled and tested in the workshop before installation.
  • Modular plastic chain belt
  • Hand-wheel adjustable side guides
  • Stainless steel frame and supports
Technicians working inside a deep concrete trench at the Al Nasr Chemicals site
Al Nasr Chemicals01 / 05
CASE STUDY 12 · BULK MATERIAL HANDLING · STEEL STRUCTURES

Belt conveyor routes through a concrete trench and over steel gantries

Client: Al Nasr Chemicals
Industry: Chemicals, energy & heavy industry

The challenge
Link a receiving hopper to the process plant over a route that includes a deep concrete trench, an elevated crossing and active site traffic.
The solution
Steel conveyor frames fabricated and erected inside the trench, a fabricated feed hopper above it, and a painted gantry carrying the belt over the plant roads, carrying the ENTRA nameplate.
  • Fabricated feed hopper
  • Steel conveyor frames in a concrete trench
  • Elevated painted steel gantry
Diverter conveyor with a transparent cover and green belts at P&G Egypt
P&G Egypt01 / 04
CASE STUDY 13 · ALUMINIUM PROFILE · TRANSFER CONVEYORS

A compact diverter conveyor with a clear safety cover

Client: P&G Egypt
Industry: Home & personal care

The challenge
Divert and transfer packed product between lines in a limited floor area, while keeping the moving parts visible and guarded.
The solution
An aluminium-profile frame with green belt sections, a transparent acrylic cover over the transfer area, a direct gear-motor drive and a local push-button control box.
  • Aluminium profile frame
  • Transparent safety cover
  • Local push-button control box
Extendable roller conveyor folded on castors
Unilever01 / 06
CASE STUDY 14 · FLEXIBLE ROLLER CONVEYORS

Extendable flexible roller conveyors on castors

Client: Unilever
Industry: Home & personal care

The challenge
Give loading and packing areas a conveyor that can be stretched, curved and moved to wherever a line or truck needs it, then folded away.
The solution
Gravity roller conveyors on a stainless steel scissor-type expanding frame, fitted with locking castors so they can be pushed into position, straightened or set into a curve.
  • Expanding scissor-type frame
  • Gravity rollers
  • Locking castors
Stainless steel walkway with stairs and guard rail in a Nestlé hall
Nestlé01 / 04
CASE STUDY 15 · STAINLESS STEEL PLATFORMS · ACCESS

Stainless steel platforms and stairs for safe access to production equipment

Client: Nestlé
Industry: Food & beverage

The challenge
Give operators and maintenance staff safe, hygienic access to machines, hoppers and overhead equipment in a food production hall.
The solution
Fixed and movable stainless steel platforms, stairs and guard rails with non-slip decks, plus perforated stainless panels closing off equipment areas.
  • Stainless steel stairs and guard rails
  • Movable access stairs
  • Perforated stainless panels
Machine frame with clear panels and red and white warning tape
Nestlé01 / 04
CASE STUDY 16 · MACHINE GUARDING · LINE INTEGRATION

Clear safety guarding around packing machines and conveyors

Client: Nestlé
Industry: Food & beverage

The challenge
Keep operators safe around moving machinery while still letting them see the process, and keep the machines easy to reach for cleaning and changeover.
The solution
Polycarbonate and acrylic panel enclosures on stainless steel frames, some on castors, built around existing machines and conveyor lines to suit each machine.
  • Clear polycarbonate and acrylic panels
  • Stainless steel enclosure frames
  • Mobile enclosures on castors
Stainless steel tubular screw feeder with sanitary clamps being prepared for delivery
Nestlé01 / 04
CASE STUDY 17 · STAINLESS STEEL FABRICATION

Stainless steel screw feeder, hoppers and wash basins for dry-goods production

Client: Nestlé
Industry: Food & beverage

The challenge
Supply fabricated stainless steel items that meet food-grade hygiene needs and fit the available space around existing dry-goods lines.
The solution
A stainless steel tubular screw feeder with sanitary fittings, fabricated hoppers and funnels for powder feeding, and a stainless wash basin built to the plant's layout.
  • Tubular screw feeder with sanitary fittings
  • Fabricated hoppers and funnels
  • Stainless steel wash basin
Narrow modular chain conveyors carrying product tubs in a Bel packing hall
Bel Egypt01 / 05
CASE STUDY 18 · MODULAR CHAIN CONVEYORS · PACKING

A network of overhead-guided chain conveyors carrying product tubs

Client: Bel Egypt
Industry: Food & beverage

The challenge
Collect and distribute round product tubs from several machines across a busy packing hall, with branching routes and tight bends.
The solution
Narrow modular chain conveyors with curved sections and branching transfers, held by aluminium profile overhead frames and fitted with side guides for the tubs.
  • Narrow modular chain belts
  • Curved and branching sections
  • Aluminium profile overhead frames
Rotary accumulation table full of jars with blue lids
Sedico01 / 05
CASE STUDY 19 · ACCUMULATION TABLES · JAR HANDLING

A rotary accumulation table buffering jars between filling and capping

Client: Sedico
Industry: Food & beverage

The challenge
Buffer a steady stream of jars between machines so a short stop on one machine does not halt the whole line.
The solution
A circular stainless steel accumulation table with guide rails and a smooth belt, connected by modular chain conveyors and a guarded transfer to the next machine.
  • Rotary stainless steel accumulation table
  • Guide rails for jar flow
  • Guarded transfer to the next machine

Planning a similar line?

Send us the product, the space and the throughput you need and the ENTRA team will recommend the right system.